Before Use - SOLAC Leviter Instrucciones De Uso

Freidora de aire
Tabla de contenido
ENGLISH
DESCRIPTION
A Thermostat
B Operation indicating light
C Heating indicating light
D Timer
E Frying basket
F Outer bowl
G Basket open button
H Basket handle
I
Air outlet
J Power cable and plug
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
USE AND CARE:
Fully extend the appliance's power cable be-
fore each use.
Do not use the appliance if the parts or acces-
sories are not properly fitted.
Do not use the appliance if the accessories
attached to it are defective. Replace them im-
mediately.
Do not use the appliance when empty.
Do not use the appliance if the timer switch
does not work properly.
Do not move the appliance while in use.
To keep the non-stick treatment in good condi-
tion, do not use metal or pointed utensils on it.
Do not force the appliance's work capacity.
Respect the MAX level.
Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
Store this appliance out of reach of children
and/or persons with physical, sensory or redu-
ced mental or lack of experience and knowle-
dge.
Do not store or transport the appliance if it is
still hot.
Never leave the appliance connected and una-
ttended if is in use. This saves energy and pro-
longs the life of the appliance.
Use only utensils appropriate to support high
temperatures.
Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the is
switched off permanently.
As a reference, in the annexed table you will
find a recommendation on the cooking tempe-
rature and time for several meals.
INSTRUCTIONS FOR USE

BEFORE USE:

Make sure that the entire product's packaging
has been removed.
Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
During first use it is normal that the appliance
emits a slight plastic odor.
USE:
Unroll the cable completely before plugging it
in.
Connect the appliance to the mains.
Take the bowl (F) out of the fryer carefully.
Note: Do not use the bowl without the basket
in it.
Note: manipulate the bowl using the basket
and its basket handle. Don't touch the bowl
when it's hot.
Put the ingredients you want to fry inside the
basket (E)
Introduce the bowl inside the fryer.
Choose the needed temperature using the
thermostat (A).
Once you've done it, choose the right cooking
time with the Timer (D) and the appliance will
start to work.
The green power pilot light (B) and the red
heating pilot light (C) will switch on.
During the process of frying, the red hea-
ting pilot light (C) will switch on intermittently,
showing when the appliance is heating.
Note: have in mind that if the appliance is cool
you should add 3 minutes to the cooking time.
Note: if you want to shake the ingredients, pull
the bowl out of the appliance by the handle and
shake it.
EN
Tabla de contenido
loading

Tabla de contenido