4.1
Single mode measurements
Aim the meter at the surface to which the distance is to be
measured.
Press
The display shows up to the last 3 measurement results. To
remove them from the display, press
deletes the most recent result.
When the device is idle for 30 seconds or more, the display
backlight and laser pointer turn off.
4.2
Continuous measurements
Aim the meter at the surface to which the distance is to be
measured.
Press and hold
To stop continuous mode, briefly press
32
briefly to trigger the measurement.
to enable continuous measurements.
LMW-100 – USER MANUAL
briefly. Each press
or
.