Notes On Safety; Symbols In The Manual; Symbols On The Equipment - Parkside PHS 450 A1 Traducción Del Manual De Instrucciones Original

GB IE
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).

Notes on Safety

Before working with the equip-
ment, familiarise yourself with all
operating components. Practice
handling the equipment and have
the function, operation and working
methods explained to you by an ex-
perienced user or specialist. Ensure
that you can shut off the equipment
immediately in an emergency. Inap-
propriate use of the device may
result in serious injury.
20

Symbols in the manual

Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.
Pull out the power plug before car-
rying out any work on the equip-
ment.
Help symbols with information on
improving tool handling.

Symbols on the Equipment

Caution!
Read through the instruction manual
carefully.
Wear eye protection.
Wear ear protection.
Wear cut-resistant gloves.
Risk of cuts!
Keep hands away.
Pull out the power plug immediately
if the cable is damaged, has been
badly twisted or is completely cut
through.