Set Up And Commissioning - Fiap profifeed SolarFeeder Instrucciones De Uso

FEEDING
profifeed

SET UP AND COMMISSIONING

In order to achieve the optimum feeding result, it is necessary to prepare a feeding plan
in advance. For this purpose, consider when you want to feed how much feed. This means
on which days of the week, which amount of feed is to be introduced over which number
of feedings (max. 6 feedings per day possible). The ejection quantity depends on vari-
ous factors, including the pellet size used, the type of feed used, the ejection speed set,
and the feeding duration. To determine a practicable value, load your automatic feeder
with the desired type of feed and determine the amount of feed that is ejected over 10
seconds at the correspondingly set ejection speed (inverting a bucket and then weighing
the feed). For example, if you get 100g of feed at 10 seconds, you can expect 250g per
feeding at 25 seconds.
Assembly
According to exploded view including profifeed
Connecting the proficontrol
tery
Connect the battery cables included in the delivery as follows:
Red cable to + and white cable to -.
In the following, program the proficontrol
ding to your wishes) before mounting it on the intended holder.
Programming the control
Connect the control to a 6 V or 12 V battery and the feeder, the control automatical-
ly recognizes the connected voltage source. The display will show the current state of
charge of the battery. The display is now set to Monday, 12:00 noon (PM).
If the display does not show anything, press the „PROG" key once to activate
the control and go to the previously mentioned point.
Setting the system time
Press „PROG" key again. One of the symbols in the top line (display of the day of the week)
will now start flashing. Set the current day of the week by briefly pressing the „-" key
until the desired day flashes.
12
SolarFeeder
For assembly and maintenance
the corresponding product videos in our
Youtube channel: https://www.youtube.com/user/FIAPGmbH
SolarFeeder
please watch
UNIVERSAL
control to accumulator 6 V - bat-
UNIVERSAL
modules (see page 2).
control (individually accor-
GB