SEL
1. Position the subject in the Viewfinder.
2. To ensure accurate focus, make sure that the subject is at least three
feet (one meter) away.
3. Set the Flash mode to Automatic Flash or Flash Off. For more
information, see the Flash section.
4. Gently press the Shutter button and keep the camera still until the
camera ready LED next to the viewfinder flashes.
5. When the image has been captured, the camera ready LED next to
the viewfinder begins to flash. This indicates that the photo is being
processed.
6. The photo counter number displayed in the Status LCD is updated.
Note: The memory usage icon (MEM) blinks when the memory is full. To take additional images,
delete photos from the camera's internal memory or MMC using the delete feature or insert an
MMC with available storage.
USING THE MMC
In addition to internal memory, the camera features an external memory port that uses a removable
MultiMediaCard (MMC) that allows you to store additional images. When the MMC is inserted, the
camera uses it as its default memory. The stored images and video clips in the internal memory will be
transferred automatically to the MMC, and all photos taken from that point will be stored on it. When
the MMC is removed from the camera, the images will remain stored on the MMC until deleted.
Inserting the memory card:
1. Locate the battery door on the bottom of the camera.
2. Slide the button on the battery door toward the center of the camera.
3. Lift the battery door to open.
4. Insert the MMC in the direction specified on the card. (fig.1.8)
5. Close the battery door.
NOTE: If an MMC with insufficient memory is inserted, there will only be a partial transfer and the
MMC will be filled. Please insert an MMC with sufficient memory.
SEL
or
NORM
4
SEL
or
ECON
fig.1.6
fig.1.7
fig.1.8
fig.1.5