RIDGID R8698 Manual Del Operador página 7

OPERATION
MOUNTING/HANGING THE PANEL LIGHT
See Figures 6 - 9, page 10.
In addition to sitting upright on its base on a flat surface, the
panel light offers a variety of hanging and mounting options in
both the vertical and horizontal position to suit your specific
location and needs.
NOTE: Be careful not to position the panel light in such a
way that prevents normal operation or damages the cord.
WARNING:
Only hang or mount the panel light in an area where
no electrical wires, utility cables, pipes, or other
obstructions are located. Contact your local utility
company or a qualified electrician if you are unsure.
Do not hang panel light from any electrical power
cord. Ensure panel light is securely installed to
prevent falling object hazard. Failure to follow these
instructions can result in electrocution, electrical
shock, or other serious personal injury.
NOTE: MAINTENANCE INFORMATION BEGINS ON PAGE 8 AFTER
FRENCH AND SPANISH LANGUAGE SECTIONS. ILLUSTRATIONS
This product has a 90-Day Satisfaction Guarantee Policy,
START ON PAGE 9.
as well as a Three-year Limited Warranty.
For Warranty and Policy details, please go to
powertools.rigid.com or call (toll free) 1-866-539-1710.
Hanging the panel light using the keyholes:
 Install two screws approximately 6 in. apart.
 Place the wide portion of the keyholes over the heads of
screws.
 Slide the panel light down until the screws are inside
the narrow portion of the keyholes and the panel light is
secure.
Hanging the panel light using the hooks:
 Hang the panel light from a sturdy location like a fence
using the built-in hooks.
Mounting the panel light to a tripod using the tripod
mounting hole:
 Place the panel light on the 1/4 in. tripod mounting screw.
Make sure the mounting hole on the base of the panel
light seats completely on the mounting screw.
 Turn the panel light clockwise to secure.
7 – English