Accessory; Damage - Shipment/Installation - Haier QJS15HYRFS Instrucciones De Instalación Y Manual Del Usuario

ACCESSORY

ICEMAKER ACCESSORY INSTALLATION INSTRUCTIONS
Disregard Icemaker Installation Instructions from IM4D Kit
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT –
• Save these instructions for local
inspector's use.
IMPORTANT –
• Observe all governing codes and
ordinances.
Note to Installer –
•
instructions with the Consumer.
Note to Consumer –
•
future reference.
• Skill level – Installation of this appliance requires basic
mechanical skills.
• Completion time – 20–60 minutes
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not
covered under the Warranty.
ITEMS NEEDED FROM IM4D KIT
1 Icemaker
2
Installation Instructions
3
Water Valve and
Tube Assembly
*NOTE: The kit includes parts that are not applicable for this refrigerator.
*NOTE: Screw lengths are the lengths of the threaded portion of the screw, not including the head.
49-1000588 Rev. 0
Be sure to leave these
Keep these instructions for
An IM4D icemaker accessory kit
is available at extra cost.
To order, call GE Appliances at
800.GECARES (800.432.2737)
or visit GEAppliances.com. In
Canada, visit GEAppliances.ca
or call 800.561.3344.
6
Water Line Clamp
(strain relief), for
house water line
ICEMAKER
WARRANTY VERIFICATION
Date Installed
Dealer
7 Warranty Label
READ AND SAVE THESE INSTRUCTIONS
Damage – Shipment/Installation
If the unit is damaged in shipment, return the unit to the
store in which it was bought for repair or replacement.
If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer.
If the unit is damaged by the installer (if other than the
customer), repair or replacement must be made by
arrangement between customer and installer.
WARNING
Connect to portable water supply only.
A cold water supply is required for automatic icemaker
operation. The water pressure must be between 40 and
120 psi (275-827 kilopascals)
8
Ice Bucket
9 Hex-Head Screw, for
attaching water valve
(1/2")*
10 Phillips Head Screws,
for mounting icemaker (2)
(7/8")*
13 Icemaker Fill Cup
(side-mounted)
17 Hex-Head Screws, for
bracket extension (1)
(1/4")*
15