Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EnGLIsH
•
When sanding new layers of paint before applying another
layer, use extra fine grit.
•
On very uneven surfaces, or when removing layers of paint,
start with a coarse grit. On other surfaces, start with a
medium grit. In both cases, gradually change to a fine grit
for a smooth finish.
•
Consult your retailer for more information on
available accessories.
MAINTENANCE
Your power tool has been designed to operate over a long
period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
C
Lubrication
Your power tool requires no additional lubrication.
D
Cleaning
WARNING: Blow dirt and dust out of the main housing
with dry air as often as dirt is seen collecting in and around
the air vents. Wear approved eye protection and approved
dust mask when performing this procedure.
WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Optional Accessories
WARNING: Since accessories, other than those offered by
BLACK+DECKER, have not been tested with this product,
use of such accessories with this tool could be hazardous.
To reduce the risk of injury, only BLACK+DECKER
recommended accessories should be used with
this product.
Consult your dealer for further information on the
appropriate accessories.
Storage
•
Switch off the tool
•
Always store your products disconnected from power supply!
•
Store the tool in a place that is as cool and dry as possible.
•
Store the tool in a place where they cannot be accessed by
children or unauthorised persons.
24
•
Do not place the power tool with the grinding head down
- always place it on the floor so that it is on its side with
the brush ring facing down. Otherwise the sanding pad
could deform.
•
Check the tool for damage before use after long periods
of storage.
Transport
CAUTION: Accidental starting during transport!
•
Always transport your products disconnected from
power supply!
•
Check the tool for damage before use after transport.
Protecting the Environment
Separate collection. Products marked with this
w
symbol must not be disposed of with normal
household waste.
Products contain materials that can be recovered
or recycled reducing the demand for raw materials. Please
recycle electrical products according to local provisions. Further
information is available at www.2helpU.com.
Tabla de contenido
