Handling And Use; Charging Mobile Devices With The Power Bank - Tronic TPB 10000 A1 Instrucciones De Uso

Handling and use

Charging mobile devices with the
power bank
NOTE
► You can charge up to two devices at a
time using the power bank If both outputs
(USB-A 2 and USB-C 3) are used
simultaneously, the output voltage for both
ports is set to 5 V Fast charging is then no
longer possible The total power consump-
tion of the connected mobile devices must
not exceed 3 A
► If the USB-A socket 2 is in fast charging
mode and the USB-C socket 3 is connected
to another device for charging, fast charging
is terminated and normal charging is acti-
vated All connected devices are now
charged at 5 V
Charging via USB-A port 2
♦ Connect the supplied charging cable 6 or
the original charging cable of the device you
want to charge to the USB-A port 2
♦ Then connect the device you want to charge
to the power bank 1 The charging process
begins automatically
♦ If charging does not start automatically,
press the ON/OFF button 5 once briefly to
start the charging process
TPB 10000 A1
GB │ IE │
13 ■