Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Introduction
Thank you for purchasing this Triton tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all users of the tool
read and fully understand this manual.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
DO NOT use in rain or damp environments!
WARNING: Moving parts can cause crush and cut injuries.
Class II construction (double insulated for additional protection)
Environmental Protection Waste electrical products should not be
disposed of with household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
Conforms to relevant legislation and safety standards.
Caution!
Toxic fumes or gases!
Technical Abbreviations Key
V
Volts
~
Alternating current
A
Ampere
n
No load speed
0
EN
Hz
Hertz
W, kW
Watt, kilowatt
/min or min
-1
(revolutions or reciprocation) per minute
6
490239_OwnerManual_05AUG21.indd 6
490239_OwnerManual_05AUG21.indd 6
Original Instructions
Specification
Model no:
Voltage:
Power cable length:
Input power:
Wheel speed:
Belt speed under no load:
Protection class:
IP number:
Sanding area:
Sanding belt size:
Sander dimensions (L x W x H):
Weight:
Sound and vibration information:
Sound pressure L
Sound power L
WA
Uncertainty K:
Weighted vibration a
Weighted vibration a
Uncertainty K:
The sound intensity level for the operator may exceed 85dB(A)
As part of our ongoing product development, specifications of Triton products may alter
without notice.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop
using the tool immediately and check the ear protection is correctly fitted and provides the
correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or
similar international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce
increased levels of noise and vibration.osha.europa.eu provides information on sound and
vibration levels in the workplace that may be useful to domestic users who use tools for long
periods of time.
T41200BS
220–240V, 50/60Hz
2.6m
1200W
2500/min
200–400m/min
IP20
100 x 156mm
100 x 610mm
410 x 181 x 181mm
6kg
:
95.4dB(A)
PA
:
106.4dB(A)
3dB
(main handle):
4.92m/s
2
h
(front handle):
6.70m/s
2
h
1.5m/s
2
and sound protection measures are necessary.
06/08/2021 08:47
06/08/2021 08:47
Tabla de contenido
