Tabla de contenido
English
READ THIS FIRST!
IMPORTANT SAFETY INSTRUCTIONS!
Warning symbol. This symbol is designed to warn the user of the presence of
important instructions mentioned in the user manual and relating to the hand-
ling and maintenance of the device.
1. Read these instructions.
6. If a subwoofer is installed in the
2. Keep these instructions.
vehicle, it is important to secure it by
3. Heed all warnings.
attaching it firmly. We recommend
4. Follow all the instructions.
fixing the sub to the floor or chassis of
5. To avoid damaging your hearing,
the vehicle for safety. If the subwoofer
do not listen to loudspeakers at high
is not properly secured, it could
volumes for long periods of time.
become a projectile in the event of an
Listening to loudspeakers at high
accident. This is even more important
volumes can cause damage to the
if the subwoofer is installed in a
user's ears and may lead to hearing
hatchback, a station wagon, a utility
vehicle or a van.
problems (temporary or permanent
deafness, buzzing in the ears, tinnitus,
hyperacusis). Exposure to excessive
volumes (over 85 dB) for more than
one hour can cause irreparable da-
mage to your hearing.
(CEI 60417-6044)
The methods of installing and mounting loudspeakers to any surface (vehicle floor or chassis) depend on the
conditions and standards of installation, refurbishment, safety and cabling in force and applicable to the surfaces
and/or brackets involved. In addition, the products may vibrate and damage the brackets onto which they
are mounted. For this reason, the installation operations must be performed by a qualified professional who
is familiar with installation and safety standards. Focal does not provide any end-of-use warranty for a given
bracket or installation, as installing the loudspeakers is the customer's sole responsibility. Focal is therefore not liable in any
capacity whatsoever in the event of incident, accident and/or any other result or damage of any kind related to the installation
of loudspeakers.
In the event of a problem, please contact your Focal dealer.
7. If cords or connectors are supplied,
use them properly as described in this
user manual without substituting them
or modifying them in any way.
8. If the kit or connector includes a
fuse, it must only be replaced by a
fuse of the same rating.
K2 POWER M
U s e r m a n u a l
Please validate your Focal-JMlab warranty,
it is now possible to register your product online at: www.focal.com/garantie
Thank you for purchasing a Focal product. Welcome to our High-Fidelity world. Innovation, tradition, excellence and pleasure
are our values; our one and only aim is to bring you a sound that is rich, pure and true. To get the most out of your product,
we recommend that you read the instructions in this booklet, then store it in a safe place to refer to in the future if needed.
IMPORTANT RECOMMENDATIONS
First of all, check the space available for fitting the speaker drivers (refer to the plans on the packaging) then proceed with
the cutting required. If mounted in the factory location, check that there is sufficient space between the speaker driver and
the protective grille.
• Keep the speaker drivers clear of any metal shavings and dust particles during the cutting process.
• Clean thoroughly before fitting the speaker drivers.
• Ensure that there are no objects positioned across the grille, as this could damage the speaker drivers.
Choosing an amplifier
It is not an excess of amplifier power that can damage your loudspeaker and drivers, but rather a lack of power. It is
recommended to use an amplifier that delivers 20% more power than the system's total power to avoid a surge or damage to
the products. Your dealer will be able to guide you, depending on your tastes and budget.
Ensure that you follow the recommendations for your amplifier in order to correctly connect each product from the K2 Power
M line.
Pre-installation wiring
You will only be able to begin fitting your loudspeakers once you have connected them using the terminal block on the
speaker drivers (fig. 3). We recommend using a cable with a marker to ensure the polarity of the speaker drivers is respected
(+/-).
INSTALLATION
Please use suitable screws to avoid damaging your sub, your vehicle trim or any of its other components (fig. 1).
Loudspeaker positioning
The loudspeakers in the range have been designed to deliver the most faithful sound reproduction for any style of music.
Nonetheless, a few simple rules should be followed to optimise their performance and to guarantee good tonal balance and
a realistic sound image (fig. 4 & 5).
SUB 5 KM
Please use suitable screws to avoid damaging your sub, the floor of your vehicle or any of its other components (fig. 8).
Connect your subwoofer to the amplifier using the terminal block located on the side of the speaker driver (fig. 9). Ensure
that the subwoofer is pointing towards an open space in order to achieve the best performance.
Volume(L)
Fréquence/Frequency F-3
(Hz)
4
41
6
39
(fig. 6)
For the purposes of improvement or to take into account any legal or regulatory changes, FOCAL-JMLab reserves the right to modify the
technical specifications of its products without prior notice. Where applicable, the images shown are intended for illustration purposes only,
and may differ slightly from the product sold.
17
Tabla de contenido
