Steinberg Systems SBS-AM-200C Manual De Instrucciones página 21

Auto power off
Backlight
HOLD
Message: the
calculation):
Hold the SET button
until UNIT appears on
the display. Then, press
the up arrow to select
ft2 or m2. Press the SET
button again until the
display shows AREA.
Enter the area using the
up and down arrows.
Velocity / volume:
Select with the UNITS
button.
After 20 minutes of
inactivity.
Sleep mode:
Press the SET button,
the display shows SLP.
Press the up arrow to
enable/disable the
sleep mode. Press and
hold the SET button
to save changes.
Please note: Sleep is a
default mode which will
be automatically turned
off after 20 minutes of
inactivity. After
deactivating this mode,
the device will run
continuously until it is
manually turned off by
the user.
Press button 10.
Press the HOLD button
to freeze the reading on
the display.
(press one time after
another).
After 15 minutes of
inactivity
It will turn on
automatically when
any button is pressed
and will turn off after
30 seconds of
inactivity.
OL: temperature too