a)
The device is not designed to be handled by persons (including children) with
limited mental and sensory functions or persons lacking relevant experience
and/or knowledge unless they are supervised by a person responsible for
their safety or they have received instruction on how to operate the device.
b)
The device can be handled only by physically fit persons who are capable of
handling it, properly trained, familiar with this manual and trained within the
scope of occupational health and safety.
c)
The device is not a toy. Children must be supervised to ensure that they do
not play with the device.
2.4.
Safe device use
a)
Do not use the device if the ON/OFF switch does not function properly (does
not switch the device on and off). Devices which cannot be switched on and
off using the ON/OFF switch are hazardous, should not be operated and must
be repaired.
b)
Disconnect the device from the power supply before commencement of
adjustment, cleaning and maintenance. Such a preventive measure reduces
the risk of accidental activation.
c)
When not in use, store in a safe place, away from children and people not
familiar with the device who have not read the user manual. The device may
pose a hazard in the hands of inexperienced users.
d)
Keep the device in perfect technical condition. Before each use check for
general damage and especially check for cracked parts or elements and for
any other conditions which may impact the safe operation of the device. If
damage is discovered, hand over the device for repair before use.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out by qualified persons, only
using original spare parts. This will ensure safe use.
g)
To ensure the operational integrity of the device, do not remove factory-
fitted guards and do not loosen any screws.
h)
Clean the device regularly to prevent stubborn grime from accumulating.
i)
The device is not a toy. Cleaning and maintenance may not be carried out by
children without supervision by an adult person.
j)
It is forbidden to interfere with the structure of the device in order to change
its parameters or construction.
k)
Keep the device away from sources of fire and heat.
l)
When replacing the battery, ensure the polarity is correct.
m) Do not expose the product to mechanical pressure.
n)
Before measurement, make sure that the fan is not blocked.