Techno Line WT 519 Manual De Instrucciones página 21

button to set the required hour.

Press button "
alarm 1 time starts to flash, press the "+" or "-" button to set the required
minute.

Press button "
of Alarm1.

When Alarm 2 is displayed，press and hole button "
seconds until hour of the alarm 2 time starts to flash, press the "+" or "-"
button to set the required hour.

Press button "
alarm 2 time starts to flash, press the "+" or "-" button to set the required
minute.
 Press button "
of alarm 2.
Notes:

If there is no valid operation within 20 seconds, it will automatically
return to normal time display mode from the setting mode.

When adjusting the value, press and hold the "+" or "-" button to adjust
quickly.

The alarm will sound for 2 minutes if you do not deactivate it by
pressing any button. In this case the alarm will be repeated
automatically after 24 hours.
Turn OFF the alarm sound

When the alarm is ringing, press any button except the "SNOOZE"
button to stop the alarm sound.

This time of the next day will ring again.
Snooze function

When the alarm is ringing, press the "SNOOZE" button the alarm
sounds to get to snooze mode. The alarm signal sounds again after 8
" to confirm your setting, the minute of the
" to confirm your setting and to end the setting
" to confirm your setting, the minute of the
" to confirm your setting and to end the setting
EN8
" for 2