essentiel b ED2 Instrucciones De Uso página 19

assembly and dehydration instructions
WARNING: do not connect the appliance to the power supply before assembling
it.
1. Check that the appliance is switched off.
2. Put the base of the appliance on a flat, secure, stable and dry surface, e.g. on
the worktop of your kitchen, and make sure that there is a gap of 30cm all the
way around the appliance. The non-slip rubber feet maintain the stability of the
appliance.
3. Prepare the food to be dehydrated according to the type of food by following the
instructions. Refer to the PREPARATION AND TREATMENT sections.
4. T a k e t h e n u m b e r o f
i n t e r m e d i a t e t r a y s y o u
need as well as the top
t r a y m a r k e d " P L A C E R
AU DESSUS / PLACE ON
T O P " . A r r a n g e t h e f o o d
on the trays and set them
aside. Never stack food or
overload the trays. Make sure that the pieces of food do not touch each other.
5. Stack the intermediate trays (as many as you want) in
the base of the appliance. Regardless of the number
of intermediate trays,you should always insert the
tray marked "PLACER AU DESSUS / PLACE ON
TOP" last (above all the others). Then, cover this tray
with the lid.
NOTES:
- do not block the vents in the lid. Do not cover the
lid!
- When filling the trays, keep in mind that the tray marked "PLACER AU DESSUS /
PLACE ON TOP" will be stacked last (above all the others).
6. Plug the power cord into a suitable outlet.
19