Technical Data; Content Of Delivery - Tyrolit HCE150 Instrucciones De Funcionamiento Originales

18

Technical Data

2
Wall chaser HCE150
Parameter
Rated voltage:
Power input:
Rated current:
Frequency:
No-load speed:
Max. disc diameter:
Spindle connection:
Cutting depth max.:
Groove width max.:
Protection class:
Degree of protection:
Net Weight:
Interference suppression:
Subject to technical changes!
3

Content of Delivery

Wall chaser HCE150 with installation tool, additional rings for use of 3 cutting discs and operating
instructions in a metal case.
4 Application for Intended Use
The wall chaser has to be used only completely mounted according to the mounting instructions.
The wall chaser is intended for professional use.
Together with a M-class vacuum cleaner and the appropriate diamond cutting discs the wall chaser may be used
for cutting slots and grooves in mineral materials e.g. concrete, brick, gas concrete, granite, lime sand brick and
tiles without using water.
Only use diamond cutting discs recommended by the manufacturer.
en
Value
230 V ~
2300 W
10 A
50 / 60 Hz
7500 rpm
150 mm
Ø 22.2 mm
45 mm
46 mm
II
IP 20
approx. 6.1 kg
EN 55014 and EN 61000
HCE150