Technical Data; Symbols Used In This Manual; Symbols On The Power Tool; Technical Specifications - Tyrolit AGE230 Manual De Instrucciones

Technical data

Ø max
n
P
1
m „EPTA Procedure 01/2003" kg
L
pA
L
WA
K
a
h, SG
K

Symbols used in this manual

WARNING!
Denotes impending danger.
Non-observance of this warning may result in death or extre-
mely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result in slight injury or
damage to property.
NOTE
Denotes application tips and important information.

Symbols on the power tool

Before switching on the power tool, read the
operating manual!
Wear goggles!
Wear ear protection!
Protection class II (completely insulated)
Disposal information for the old machine
(see page 17)

Overview (Figure A)

1 Switch
Switches the power tool on and off.
2 Starting lockout/Locking button
Prevents the power tool from starting up unintentionally
and locks the switch during continuous operation.
3 Quick-clamping lever
4 Spindle
16
AGE230
mm 230
mm M14
1/min 6,500
W 2,100
4.9
dB(A) 93
dB(A) 104
dB(A) 3
2
5.1
m/s
dB(A) 1.5
5 Threaded flange
a Clamping nut
b Clamping flange
6 Guard
7 Gear head
With air outlet and direction-of-rotation arrow.
8 Auxiliary handle
Side handle can be fitted on the left, the top or the right.
9 Spindle lock
Secures the spindle when the tool is changed.
10 Switch handle
11 4.0 m power cord with plug
12 Stop key
13 Rating plate (not shown)
Operating instructions
WARNING!
Before carrying out any work on the angle grinder, always pull
out the mains plug.
Before switching on the angle grinder
Unpack the angle grinder and check that there are no missing
or damaged parts.
Figure B:
Connect the guard to the clamping flange with the clamping

ring by inserting the cam on the clamping ring into the
groove on the flange (1.).
Figure C:
Rotate guard hood into the required position (2.) and tight-

en clamping lever (3.)
Attaching the auxiliary handle.

Switch on and off
Brief operation without engaged switch rocker
(Figure D)
Press and hold down the starting lockout (1.).

Press the switch (2.).

To switch off, release the switch.

Continuous operation with engaged switch rocker
Figure E:
Press and hold down the starting lockout (1.).

Press and hold down the switch (2.).

Press the locking button (3.).

Figure F:
To switch off, briefly press and release the switch.

Adjusting the quick-release guard (Figure G)
WARNING!
Before carrying out any work on the angle grinder, always pull
out the mains plug.
When using the angle grinder for roughing or cutting, never
work without the guard.
A special cutting guard must be used for cut-off grinding.
CAUTION!
Risk of injury! Wear protective gloves!
Loosen the clamping lever (1.).

Adjust the guard (2.).

Retighten the clamping lever (3.).

TYROLIT
AGE230