Idiomas disponibles
Idiomas disponibles
manufacturing process.
· Take up the jug kettle from the base before filling.
· To fill the jug kettle, open the cover by press the lid-lever downwards, then fill to
the desired level (min 0.5L-Max.17L), close the lid by pressing it down until it clicks
into place.
· Plug the power supply cord into the main, press the On/Off switch, the power
indicator lights up.
· When the water has boiled the kettle will automatically switch itself off, you can
stop the boiling process at any time by lifting the On/Off switch. The power indicator
will go out.
Note: Do not open the lid when steam is coming out of the spout.
Cleaning
· First read the instructions in the section titled "Importance".
· Avoid using abrasive cleaning agents.
· Empty the kettle and allow to cool, open the lid， lift out the filter, rinse the filter
under warm water and brush off any impurities.
· Refitting is the reverse of removal.
Descaling
· Half fill the kettle with tap water and add the juice of 1 lemon to the water.
· Boil this mixture and allow it to stand for 15 minutes. Re-boil the mixture and allow
it to stand a further 15 minutes. Re-boil this mixture a third time then rinse the kettle
well.
Correct Disposal of this product
This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this
product for environmental safe recycling.
