Idiomas disponibles
Idiomas disponibles
· Before you connect the kettle to the mains supply, make sure that the voltage
indicated on the rating plate, located on the bottom of the jug kettle matches the
mains voltage in your home. If it does not, contact your dealer and do not use the
kettle.
· The kettle will switch off automatically when the water has boiled. You may switch
the kettle off before the boiling process if complete by using the on/off switch.
· After the kettle has switched off automatically (or has been switched of manually)
it may need time to cool down. After 15-20secs, the kettle can be switched on
again.
· If the kettle ever boils dry, the kettle will switch off automatically and the power
indicator will go out. Allow 15 minutes to cool before refilling with cold water. The
safety cutout will automatically reset during this time.
· Place the kettle on a stable flat surface.
· Ensure that the kettle is switched off before removing it from its stand.
· Never immerse the kettle or cord in water or any other liquid. Do not allow liquid to
penetrate the electrical parts of this kettle.
· Prevent children from pulling on the mains cord or knocking the kettle over.
· Ensure that the mains lead does not overhang the worktop surface.
· Before cleaning the kettle disconnect from the power supply and wait until it was
cooled down.
· Only use the cord supplied with this kettle. If a replacement is required, only
approved components may be used.
·The outside surface of the kettle may get hot during use, please take care when
using the kettle.
· Never fill in water more than the maximum acceptable water level.
·Keep electrical appliance out of reach from Children or infirm persons. Do not let
them use the appliance without supervision.
Before first use
Before first use, it is recommended to operate the kettle for 2 or 3 times following
the instructions above, this will remove any dust or residues remaining from the
