Environment Protection - M7 DG501 Manual De Instrucciones

PROBLEM
The tool does not work.
Wheel cannot be installed.
Auxiliary handle cannot be
installed.
Grinding is too slow.
1. Tool, accessories and packaging should be sorted for environment-friendly recycling.
2. Power tools and accessories at the end of their service life still contain large amounts of valuable
raw materials and plastics which can likewise be fed back into a recycling process.
3. Some dust created by working contains harmful chemicals must be collected by special garbage
re- cycle site.
SERVICE
1. In case of warranty, repair or the purchase of spare parts, always contact an authorized service
center. Attach the service card and the invoice.
2. The warranty does not cover normal wear, overloading or abnormal use of the product.
18
ACCESSORIES
TROUBLESHOOTING
The battery is depleted.
The tool or the battery
The tool or the battery
Wheel is of the wrong
There is dust in the
auxiliary-handle
The grinding wheel is

ENVIRONMENT PROTECTION

NO
CAUSE
is overloaded.
is overheated.
size.
sockets.
worn out.
SOLUTION
Charge the battery.
Decrease the load on the
tool and restart the tool
again.
Allow the tool and battery
to cool down and restart
the tool.
Refer to specification
chart for proper wheel
size.
Clean and clear the
sockets.
Replace the grinding
wheel.