LEGRAND 036 10 Manual Del Usuario página 8

Cabling
Important :
- Transformers must be charged to more than 60% of their
rated power.
- Allow for the efficiency of transformers when calculating the
permissible power (e.g. transformer for a 50-W lamp with 0.78
efficiency => actual power consumed by the transformer = 64
VA).
Safety instructions :
his product should be installed preferably by a qualified
el ectrician.Incorrect installation and use can entail risk of
electric shock or fire. Before carrying out the installation, read
the instructions and take account of the product's specific
mounting location.
Do not open up the device. All Legrand products must be
exclusively opened and repaired by personnel trained and
approved by LEGRAND. Any unauthorised opening or repair
completely cancels all liabilities and the rights to replacement
and guarantees.
Only use genuine accessories.
Operation
The remote dimmer can be operated as follows :
• Local : control of the lighting points linked to its terminals :
using the ON, OFF button
- illumination by a short press on the ON button
- increasing light level by a long press on the ON button
- switch off by a short press on the OFF button
- decreasing light level by a long press on the OFF button
using buttons 1 and 2
- illumination to 66% (factory set level) by a short press on button 1
- illumination to 33% (factory set level) by a short press on button 2
- increasing light level by a long press on button 1
- decreasing light level by a long press on button 2
• At receiver (actor) : lthe remote dimmer can take part in 32 different scenarios, by locally executing controls coming
from other transmitters : ON, OFF , dimming or illumination to preset levels.
ON
OFF
100-240 V
50-60 Hz
5A
N N
L
N
L
15
16
LEARN
/ 1 /
/ 2 /