Problems And Solutions - LEGRAND 036 10 Manual Del Usuario

Problems and solutions

Problem
The learn indicator light comes on
for 5 seconds.
The learn indicator light comes on
for 10 seconds.
During learning the learn indicator
light stops blinking.
The programmed function button
does not work.
On saving the scenario,
the learn indicator lights
of some receivers do not go off.
Cause
Learning is impossible.
The number of saved
transmitters is more than 32.
The learning mode shuts down
after 10 minutes
(if no action).
After pressing the learn button,
the learning of the function button
is done in the minute that follows.
Incorrect communication
between the products.
23
24
Solution
Install compatible products.
Delete the unused scenarios.
Restart the learning.
Restart the learning.
Check the cabling (connection).
Look for a possible interference device.
Insulate with a filter.