Master Authorisation; User Identification - Fermax AC-MAX Manual De Instalación

Cod. 970077 V08_19

4.4.1 Master Authorisation

In the last window of card programming wizard it is possible to select the option
Authorization
. The user with such card can does not have to scan fingerprint when identifying at
Accept master authorization
readers with
Master exemption
with
Note: Mifare cards have different capacities. Mifare Classic 1k cards can store 1 fingerprint
template. Mifare Ultralight cards do not have enough memory to store any fingerprint template.

4.5 User identification

User identification by FPAC-MAX FINGERPRINT reader depends on selected recognition mode
(section 4.2.1), input with function
7). Input [5] is used for dynamic switching of user identification method. More information on
application of the input with function [5] is given in table 6 below. The option
applicable only for 1:N recognition mode and it enables permanent activation of card reader in
FPAC-MAX FINGERPRINT. When this option is selected then user can identify by means of card or
fingerprint templates as needed.
Options and functions of AC-MAX HW enable detailed and variant configuration of user
identification method. But there can be distinguished following most often applied settings:
•
1:N recognition mode, [5] input is not used,
identified only by fingerprint templates recorded in FPAC-MAX FINGERPRINT memory
• 1:N recognition mode, [5] input is not used,
identify by means of fingerprint template recorded in FPAC-MAX FINGERPRINT memory or by means of
his Mifare card as needed
• 1:1 recognition mode, [5] input is not used,
first use his Mifare card with his fingerprint templates and then he must place his finger on FPAC-MAX
FINGERPRINT scanner
Table 6. User identification by FPAC-MAX FINGERPRINT when input with function [5] is
used.
Recognition Card Reader
mode Mode
1:N Input with the
function
deactivated
1:N Input with the
function
activated
1:1 Input with the
function
deactivated
1:1 Input with the
function
activated
All manuals and user guides at all-guides.com
option enabled (fig. 7). This authorization is not related
which can be assigned to user in AC-MAX software.
[5]: Card Reader Mode
User identification
Place finger on FPAC-MAX FINGERPRINT scanner.
[5]
Place finger on FPAC-MAX FINGERPRINT scanner or read
[5] proximity card.
Place your Mifare proximity card in vicinity of FPAC-MAX
[5] FINGERPRINT reader and when two beeps sound is made, place
your finger on FPAC-MAX FINGERPRINT scanner. Users with
Master authorization can use their cards and they do not have to scan their fingerprints in order to get access.
Read proximity card.
[92]
and the option
Card Reader Mode
Card Reader Mode
option is enabled – user can
Card Reader Mode
option is disabled – user must at
User with Master
Card reader mode
(fig.
Card Reader Mode
option disabled – user is
25/26
is