Introduction; Description And Specification - Fermax AC-MAX Manual De Instalación

Cod. 970077 V08_19
1. I
NTRODUCTION
This manual contains minimum information that is necessary to properly install and configure AC-
MAX FINGERPRINT readers in AC-MAX access control system. Additional information on AC-MAX
configuration can be found in
2. D
ESCRIPTION AND
AC-MAX FINGERPRINT biometric reader operates as access control terminal in AC-MAX system. AC-
MAX FINGERPRINT is equipped with fingerprint scanner and Mifare Classic proximity card reader.
Users can be identified by comparison of their fingerprints with fingerprint templates recorded in
reader's memory (1:N mode) or by comparison of their fingerprints with fingerprint templates
recorded in Mifare card memory (1:1 mode). The reader is not a standalone device and it must be
connected to AC-MAX Central Unit. The communication in LAN/WAN is encrypted with AES128 CBC
method.
Fig. 1 The example of FPAC-MAX FINGERPRINT operation with AC-MAX CU- KIT
All manuals and user guides at all-guides.com
www.fermax.com
S
PECIFICATION
AC-MAX CU / EXP
KIT AC-MAX
FPAC-MAX
17/26