Voltage Reference - NewAir NPR048GA00 Manual Del Propietário

The battery gear should be set from H to M or from M to L if there is a voltage
protection code F1 shown on the panel. The battery gear should be set to H if
the product keeps working after turning off the car engine, or the product may
drain the battery.

VOLTAGE REFERENCE

Input
Mode
L
M
H
*Reference numbers may change depending on the scenario and external
factors.
*USB output: +5V DC/1A, suitable for small devices like mobile phones, tablets,
etc.
Reset: switch off the fridge, keep pressing
-
and " " at the same time until displays as below:
Instructions for solar charging: When using solar panel to charge the
refrigerator, place the refrigerator in a cool place to avoid overheating that
would cause malfunction of the refrigerator. The battery icon on the display
will show the charging status when it is charging.
The charging input power should be higher than the working power of the
refrigerator (about 40-45W), or press the power button to make the
refrigerator enter the standby state, otherwise the battery will not be able to
charge. It is recommended to use a 100W solar panel.
www.newair.com
DC 12V
CUT IN CUT OUT
9.0V 10.9V
10.1V 11.4V
11.1V 12.4V
DC 24V
CUT IN
21.3V
22.3V
24.3V
until E1 displays, then press "
EN
CUT OUT
22.7V
23.7V
25.7V
+
"
11