Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
OPERATING INSTRUCTIONS
Power supply: Connect to 12V/24V DC power, 100~240V AC power (with an
adapter) or use backup Lithium battery.
Display Screen Initialization: Connect to the power supply, the buzzer will
make a long beep, and the display will light up for 2 seconds then enter the
normal operating mode.
Power On/Off: Press
to switch ON and hold for three seconds to switch OFF.
-
+
Temperature Setting: Press "
" or "
", it will enter the temperature setting
-
+
mode of the left chamber, press "
" to increase temperature, press "
" to
decrease temperature. Switch to the right chamber by pressing·
.
Cooling Mode: Press
to switch cooling mode between MAX (fast cooling)
and ECO (Energy saving Mode) (*Factory setting is MAX.)
Temperature Unit Setting: Switch off the fridge, press
for three seconds, it
+
will display E1, then switch to E5 by pressing
. Under E5 mode, press "
" or
-
"
" to select Celsius or Fahrenheit. (*Factory setting is Celsius.)
Battery Protection Mode: Press
for three seconds until screen flashes,
then press
again to select three battery protection modes H(High),
M(Medium) and L(Low) (*Factory setting is H.)
Due to the different output voltages between vehicles, H should be set when
the product is connected to car power, and M or L should be set when it is
connected to a portable battery or other back-up battery.
www.newair.com
10
Tabla de contenido
Solución de problemas
