Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
ADJUSTING SETTINGS (FIG. F)
While in Live View mode (see FIG. B), tap the Settings icon
tap one of the buttons to view/adjust the following settings:
Camera Settings
• Temperature Scale: Select °F or °C (default is °F)
• High/Low Temperature Crosshair: On/Off (default is On)
• Center Temperature Crosshair: On/Off (default is On)
• Temperature Bar: On/Off (default is On)
• Differential Temperature: On/Off (default is On)
• Touchscreen Temperature: On/Off (default is On)
• Shutter Sounds: On/Off (default is On)
• Alarm Sounds: On/Off (default is On)
• High/Low Temperature Alarm: Select Temperature, On/Off, enter
temperature from -4 to 752°F (-20 to 400°C)
• Color Palette: Select Ironbow, Rainbow, or Grayscale (default is Ironbow)
• Emissivity: Enter emissivity from 0.01 to 0.99 (default is 0.95)
• Time Lapse: Change capture interval by selecting either slow (4 fps),
medium (8 fps), or fast (16 fps) (default is medium (8 fps)).
Frequently Asked Questions (FAQ)
• Helpful tips for using the Thermal Imager
Language
:
JJ
• Select English, Spanish, or French
EMISSIVITY
Emissivity is a measure of the ability of a surface to emit thermal
energy by radiation. Different types of surfaces (metals, masonry,
wood, etc.) emit thermal energy through radiation at different
efficiencies. Accordingly, these materials have different emissivity
coefficients which must be considered in order to make accurate
measurements with an infrared thermometer.
Emissivity on the TI222 may be adjusted from 0.01 to 0.99 to enable
accurate measurement of the temperature of most types of materials.
Generally speaking, shiny bright surfaces such as chrome, white
boards, etc. exhibit lower emissivity than flat black materials.
For guidance only, the chart on the next page may be used to
estimate emissivity for many different types of materials. However,
the emissivity of surfaces is dependent upon many parameters such
as surface finish, temperature, shape of the object, etc.
10
OPERATING INSTRUCTIONS
:
HH
:
II
and
O
Tabla de contenido
