Aux In Function - Trevi XF 460 Guia Del Usuario

AUX IN FUNCTION

1. Connect any unit with audio output via a special 3.5mm Jack cable to the AUX input (14);
2. Press the MODE (11) button on the unit or the MODE (16) button on the remote control
several times until the display shows "AUX";
3. Adjust the external device by your own controls.
RECORDING FROM MICROPHONE
1. Insert a Micro SD card into the slot (4) or a USB stick into the socket (10) and turn on
the device;
2. Connect the supplied wired microphone to the MIC IN socket (1);
3. Turn on the microphone;
4. Adjust the microphone input volume via the command (2) on the unit and adjust the
ECHO via the command (3);
5. Press and hold the
on the display;
6. Al the recording is finished, press and hold the
the recording just made will be automatically played.
Note:
- The recordings are present in the AB_REC folder present in the Micro SD or USB stick.
- The function only records what is recorded by the microphone.
LED DISCO-LIGHT
To switch On the Disco-Light effects, press the LED button (15).
To switch Off the Disco-Light effects, press the LED button (15) again.
MICROPHONE CONNECTION AND MICROPHONE PRIORITY FUNCTION
1. Connect the supplied wired microphone to the MIC IN socket (1);
2. Turn on the microphone;
3. Adjust the microphone input volume using the command (2) on the unit and adjust the
ECHO using the command (3);
4. Press and hold
Priority" function, the message "N-ON" will appear on the display. While using the
microphone, the audio volume of the music being played is automatically lowered and
then returned to normal volume when the microphone is no longer used;
9
5. Press and hold
message "N-OFF" appears on the display.
:
/REC button (13) for a few seconds, the word "REC" will appear
9
/MPRI (6) button for a few seconds to activate the "Microphone
/MPRI (6) button for a few seconds to deactivate this function. The

/REPLAY button (7) on the unit,
13