Temperature Setting; Fahrenheit/Celsius; Default Settings; Reset To Default Settings - STORZ & BICKEL Mighty Modo De Empleo

6 C O M M I S S I O N I N G A N D O P E R AT I O N
6.7.3. Temperature Setting
5
4
The temperature can be set bet-
i
ween 40°C and 210°C (104°F and
410°F) (see Chapter 4."Overview of
Plants", page 46).
X When you press the plus button,
the set value is increased, and
when you press the minus button,
the set value is decreased.
X When you briefly tap on the plus or
minus button, the set values are in-
creased or decreased respectively
in 1-degree increments.
X If you keep the plus or minus but-
ton pressed, the set values start
running continuously in the corre-
sponding direction.
The booster temperature can be
i
adjusted in the same way. However,
it cannot be set lower than the pre-
vious set temperature. The current
actual temperature can be read
from the upper line of the display.
1 Actual temperature display
1
2 Plus temperature button
2
3 Battery charging display
4 Minus temperature button
3
5 Set temperature display
(displayed blinking:
booster temperature)

6.7.4 Fahrenheit/Celsius

If you simultaneously tap on the plus
button and the minus button, the dis-
play changes from degree Celsius to
degree Fahrenheit and vice versa.
6.7.5 Default Settings
Basic temperature: 180°C (356°F)
Booster temperature:
additional 15°C (27°F)
corresponding to 195°C (383°F
6.7.6 Reset to Default Settings
X It is possible to reset settings.
X The reset is made by pressing the
ON/OFF button for ten seconds
while the Vaporizer is switched on.
If the ON/OFF button has been
i
pressed for ten seconds, the signal-
ing of the reset is made by vibration.
The basic temperature is reset to
180°C (356°F) and the booster tem-
perature is reset to 195°C (383°F).
52