Warranty Disclaimer - Hama 00223619 Instrucciones De Uso

Unless different instructions have been expressly
given in the operating instructions for the devices
you are charging, proceed as follows:
• Without connecting it to the socket, determine the
mechanical compatibility between the car power
supply unit's adapter and the connection socket
on the device.
• Set the voltage selector switch to the voltage
required by your terminal device.
• Plug the car power supply unit into the socket
provided for it.
• The terminal device can now be used and
switched on.
The product has replaceable fuse. Always replace
this fuse with the same type of fuse with the same
electrical values (see Fig. 3).
Note on connection to possible devices
• Before connecting a device, check that this
can be
supplied sufficiently with the power supply
unit's current output.
• Check whether the device intended for
mains operation is compatible with the pin
assignment of the universal power supply unit.
If necessary, ask the dealer who supplied your
terminal device or contact your terminal device
manufacturer's support service.
Note - car battery
With some vehicles, it can happen that power
continues to be supplied even though the ignition
has been switched off. You should therefore
disconnect the product from the line connection
when not in use to protect your car battery from
being drained.
5. Care and maintenance
• Only use soft, dry towels to clean the product.
Note
Disconnect the device from the mains before
cleaning and during prolonged periods of
non-use.
6. Technical data
Car power supply unit
Input
Output current
Output voltages (DC)
Replaceable fuse

7. Warranty disclaimer

Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.
12–14 V
3000 mA max
1.5 – 3.0 – 4.5
– 5.0 – 6.0 – 9.0
– 12.0 V
5A
3