Before The Assembly - Blumfeldt Cosmic Beam Plus Manual De Instrucciones

BEFORE THE ASSEMBLY

Safety instructions for assembly
• Secure the heater properly to the wall or place it in the correct position.
• The appliance must be placed in a way that it cannot be used by a person in
the shower or bathtub.
• The appliance must be mounted so that it is not directly under a power
socket.
• If the power cable is damaged, contact an electrician or the customer
service.
• Always stow away the heater when not in use.
• Make sure that the appliance has cooled down before putting it away.
• Only use the appliance in the living room if infirm persons and children are
supervised in the vicinity of the appliance.
• To prevent damage, please make sure that the appliance is placed at a safe
distance from curtains, furniture and other objects.
First steps
Step 1: Use the screws to connect two of the fixation brackets to the
•
appliance, as shown in figure A.
Step 2: Use the screws to connect two of the fixation brackets to the
•
ceiling or wall as shown in figure B.
Step 3: Connect the unit's bracket to the ceiling/wall bracket with a screw,
•
as shown in figure C.
EN
21