Bt Operation - auna Stereosonic Manual De Instrucciones

EN
46

BT OPERATION

The unit has a BT function that can receive a signal within 8 metres.
Pairing the unit with a BT device to listen to music:
1. Press the STANDBY button on the remote control or ON/OFF button to
turn on the power on .
2. Press SOURCE button or AUX/BT button on the remote control to turn
on the BLUETOOTH mode.
3. If the unit is not paired with any BT device, the display will flash "BT
LINK".
4. Activate your BT device and select the search mode.
5. "MCC-120" will appear on your BT device list.
6. Select "MCC-120" and enter "0000" for the password if necessary.
7. To disconnect the BT function, press the SOURCE button to switch to
another mode or disconnect the function from your BT device.
NOTE
• If the signal strength is weak, your BT receiver may disconnect, but it
will re-enter pairing mode automatically.
• For a better signal reception, remove the obstacles between the unit
and the BT device.
• This unit supports A2DP (Advanced Audio Distribution Profile) and
AVRCP (Audio Video Remote Control Profile) functions. This can only be
paired with one BT device at one time.
• Compatibility with all devices and media types is not guaranteed.
• Some mobile phones with the BT function may connect and disconnect
as you make and end calls. This is not an indication of a problem with
your unit.