Operation - auna Stereosonic Manual De Instrucciones

OPERATION

Muting
The volume is muted temporarily when pressing the MUTE button on the
remote control. Press again to restore the volume.
Sound control
When the EQ button on the remote control, the current mode setting will
be displayed. To change to a different mode, press the EQ MODE button
repeatedly until the desired sound mode appears."CLASSIC, POP, JAZZ,
ROCK".
FM Radio
1. Press the STANDBY button on the remote control or ON/OFF button to
turn on the power on.
2. Press the FM button on the remote control or SOURCE button repeatedly
on the main unit to select FM function.
3. Press TUNING up and TUNING down to choose the desired station.
4. AutoScan: when the TUNING up or down button is pressed for more than
0.5 seconds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
5. Memory station: under radio status, press the PROG button on the
remote control or MEMORY button repeatedly on the main unit , the
display will flash.
6. Press Preset + or Preset- to choose the memory position.
Using the Radio Data System (RDS)
RDS is a broadcasting service which a growing number of FM stations
provide. These FM stations send additional signals along with their regular
programme signals. They send their station names, and information about
the type of programme such as sport, music, etc.
• When tuned to an RDS station, "RDS" and the station name will be
displayed.
• "TP" (Traffic Programme) will appear on the display when the received
broadcast carries traffic information, and "TA" (Traffic Announcement)
will appear while a traffic information is on air.
• "PTYI" (Dynamic PTY Indicator) will appear while the Dynamic PTY
station is received.
EN
41