Checking The Settings; Fitting The Protective Housing - SOMFY LT 50 CSI RTS Guia De Instalacion

EN
4.3.2 Upper end limit
- Raise the roller shutter or awning to the required raised
position by pressing on the «Up» button.
- Release the «Up» button when the roller shutter or awning
reaches the required raised position.
- If necessary, adjust the position of the roller shutter/awning
with the Up and Down buttons.
- Looking at the motor head end-on:
- If the roller shutter or awning lowers from the right-hand
side of the head, press the white button to unlock it: the
upper end limit is set.
- If the roller shutter or awning lowers from the left-hand
side of the head, press the yellow button to unlock it: the
upper end limit is set.

4.4 Checking the settings

- Check the setting of the upper and lower end limits using
the RTS control point.
- Press the RTS control point PROG button to program the
first control point.

4.5 Fitting the protective housing

- If the motor is used outdoors on an awning with the push-
buttons facing upwards and without pull tabs, the protective
housing should be refitted.
- For all other fitting arrangements such as the push-buttons
facing downwards or using adjustment pull tabs, for
example, the protective housing should not be fitted.
18
Copyright © 2007-2020 SOMFY ACTIVITÉS SA, Société Anonyme. All rights reserved.
LT 50 CSI