DC-700ETH/T
11. COMPACT SYSTEM NETWORK SPECIFICATIONS
The COMPACT public address system allow audio and control data communication over Ethernet and IP networks.
Working at OSI levels 3 and 4, the protocol allows communication through routers (IP protocol) by means of gateway and
subnet mask configurations. These features allow working at both LAN and WAN level.
The protocols used allow to work without any problem in networks where the different public address systems equipment
are located in different VLANs.
Communications it uses are:
TCP/IP for control communications between different equipment.
UDP Unicast for the audio broadcasting from a local IP microphone to a local IP audio matrix (point to point commu-
nication).
UDP Multicast for the audio broadcasting from a global IP microphone to the IP audio matrixes (point to multipoint
communication).
VoIP: IP Audio matrix allows to work also like a receiving VoIP terminal (one simultaneous call) as following stand-
ards:
-
Call establishing according to SIP RFC 3261.
-
For zones selection --> DTMF through SIP INFO or RFC 2833.
-
Supports calls "Peer to Peer" or through Proxy server.
-
RTP audio (Unicast/Multicast).
-
Supported audio codecs in VoIP calls:
G711 (µ-law + A-law)
G722
L16 (16 bits / 44.1KHz)
For a properly operation as a VoIP terminal, network has to be configured according to the defined specifications for
IP telephony.
Ports for standard communication services used in COMPACT system:
TELNET
FTP
Ports for the SECURE communication services used in the COMPACT system:
SSH
FTPS
Configuration and User Manual. Version 5.2.001
DC-700ETH/T.
Protocol
TCP (Unicast)
TCP (Unicast)
Protocol
TCP (Unicast)
TCP (Unicast)
R+D Department
Configuration and user's manual
11. COMPACT SYSTEM NETWORK SPECIFICATIONS
Port
23
21
Port
22
990
Others
Others
45