Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DC-700ETH/T
3.3.2.4 Add/Remove group radio buttons to an area
CAUTION: Groups must first be created using the Call Point or CallPoint
Configurator software.
.
To add group selection buttons:
1. Activate the Edit Mode (see section 3.3.2.1).
2. Select the area where you want to add the group selection
buttons.
3. Long press and hold on any point in an area free of
elements and a circular selection menu will appear.
4. Select the
Add
icon.
5. Select the
Group
icon.
6. The list of available groups appears. In the
select the groups you want to add.
7. Press OK.
To delete group selection buttons:
1. With Edit Mode activated, long press and hold the button you want to delete.
2. Select the
Delete
icon.
3. Select
YES
to confirm deletion.
If you do not wish to perform any further configuration operations on the DC-700ETH/T display, exit the Edit Mode (see
section 3.3.2.1).
Configuration and User Manual. Version 5.2.001
DC-700ETH/T.
Selected
column,
R+D Department
Configuration and user's manual
3. START-UP
Group selection
button
22
Tabla de contenido
