Air Conditioning And Ventilation - Keba KeContact M20 Manual De Configuración

Mounting and installation instructions
4) Screw down the housing again with the M4 screws.
The KC-M20 is dismantled from the top hat rail.
Dismantling from the wall
Tools required:
●
To remove the KC-M20, proceed as follows:
1) Remove the KC-M20 with wall brackets by unscrewing the screws in the
2) Remove the wall brackets from the KC-M20 by unscrewing the four M4
The KC-M20 is dismantled from the wall.
5.8

Air conditioning and ventilation

CAUTION!
High temperatures may irreparably damage the device!
● The operating temperature inside the control cabinet must not exceed
270
Phillips screwdriver
wall.
screws.
the permissible ambient temperature of the KC-M20. If this cannot be
guaranteed through natural heat dissipation, an air conditioning of the
control cabinet must be provided.
M20
Configuration manual V1.01
© KEBA 2022