Wall Installation - Keba KeContact M20 Manual De Configuración

Mounting and installation instructions
7) If necessary, establish protective grounding for the mounting package.
5.6

Wall installation

The KC-M20 can optionally be installed on a wall. Wall brackets are needed
to do this. These are not included in the scope of delivery and can be or-
dered as accessories.
Information
The SIM card may need to be installed before the mounting is done. Other-
wise, installation is no longer possible.
Required materials and tools:
●
●
●
The four screw holes are located on the underside of the KC-M20.
Fig. 5-18: Screw holes on the underside of the KC-M20
To install the KC-M20 on the wall, proceed as follows:
1) Unscrew the M4 screws on the underside of the housing.
2) Secure the two wall brackets (1) on the KC-M20 with four M4 screws.
268
4 x M4 screws, 10 mm length (included in the scope of delivery)
Phillips screwdriver (included in scope of delivery)
Wall brackets (not included in the scope of delivery)
M20
Configuration manual V1.01
© KEBA 2022