Caring For Your Product - Oster TEXTURE SELECT MASTER SERIE Manual Del Usuario

Using the Pre-Programmed Settings
1. Press the ON/OFF power button to turn the product on. The power light
will blink, indicating the product is active and ready to use. The light will
stay on when the motor is running.
2. Select and Press the desired Pre-Programmed Setting Button:
- Smoothie
- Food Chop/Salsa
3. To change your selection, press another Pre-Programmed Setting button
(Smoothie or Food Chop)
4. Once pre-programmed selection is made, choose your desired texture. The
default texture is medium but can be changed to thin or thick dependent on
your preference by pressing the texture button.
5. Press the Start/Stop button for the blending process to begin.
6. Once the program is complete the product automatically stops. Please note:
You may press the Start/Stop button to cancel the program at any time.
7. Press the ON/OFF power button to turn the product off. This product is
pre-programmed to turn off automatically if not used for a period of several
minutes. All lights will turn off when the unit automatically powers down.
Using the Manual Controls
The Manual Controls include:
Low
Med
High
Pulse
Start/Stop
Use these controls for personal recipes or to continue blending after a
Programmed Setting is finished.
1. Press the ON/OFF power button to turn the product on. The power light
will blink, meaning the product is active and ready to use. The light will stay
on when the motor is running.
2. Put the ingredients into the jar.
3. Secure the lid and the filler cap.
High
1. Press the "High" button followed by the Start/Stop button to run the product
at a high speed.
2. Press the Start/Stop button to cancel the blending at any time.
3. Press the ON/OFF power button to turn the product off.
Medium
1. Press the "Medium" button followed by the Start/Stop button to run the
product at a medium speed.
2. Press the Start/Stop button to cancel the blending at any time.
3. Press the ON/OFF power button to turn the product off.
8
Low
1. Press the "Low" button followed by the Start/Stop button to run the product
at a low speed.
2. Press the Start/Stop button to cancel the blending at any time.
3. Press the ON/OFF power button to turn the product off.
Pulse
1. Verify that the blue light is blinking. This indicates that the blender is turned on.
2. Press and hold the "Pulse" button.
3. Release the pulse button to stop.
4. Press the ON/OFF power button to turn the product off.
Use pulse button to crush ice or chop food.

Caring for Your Product

After Use
1. Press the OFF button and unplug blender. Lift the jar straight up from the
base, remove the lid and empty the jar.
2. If necessary, use a rubber spatula to scrape foods
away from the sides of the jar.
Cleaning
WARNING: Blades are sharp. Handle carefully.
CAREFULLY release the blade from the bottom
of the jar by turning the threaded jar bottom
counterclockwise. The jar lid, filler cap and blade are
dishwasher safe. Use the top rack of the dishwasher for the jar lid, filler cap, and
blade. Place sealing ring into bottom basket of dishwasher.
You can also wash the parts in warm, soapy water. Rinse well and dry. Wipe
the base with a soft, damp cloth to clean. Never submerge the blender base in a
liquid.
Check the parts as you put them back together.
TIP: Run blender with soapy water for 20-30 seconds at Low or Medium Speed
for cleaning without disassembly. Follow with clean water rinse.
Storing
Reassemble the blender for storage. Leave the lid open a gap so no odors are
retained.
NOTICE: Never put the jar, or any other parts, in a microwave oven. Never
store foods or drinks in the jar.
Servicing
This appliance has no user serviceable parts. Any servicing beyond the cleaning
described in the Cleaning section should be performed by an authorized service
representative only.
If repairs are needed, send your appliance only to an authorized OSTER
Appliance Service Center. Replacement parts are available on www.oster.com or
call 1-800-334-0759.
®
9