Cleaning And Maintenance - Venga VG RVC 3000 WH Manual Del Usuario

CLEANING AND MAINTENANCE

To keep your Venga! robot reliable and operating at peak performance, please perform
the following care procedures. If you notice the robot picking up less dust or debris from
your floor, then please empty the dust bin and clean the filter and the rolling brush.
Cleaning the brushes is important as hair may remain stuck and block them.
Recommended cleaning/replacement frequency:
Dust bin
Filters
Rolling brush
Side brushes
Brush guard
Charging pins
Swivel wheel
A spare parts kit is available on Amazon under the name: SP VG RVC 3000 KIT (ASIN reference:
B081HHJYY8). It is suitable for VG RVC 3000 WH / VG RVC 3000 WH BS / VG RVC 3000 BK / VG RVC
3000 BK BS.
Emptying the robot's dust bin
1. Press the bin release button to
remove the dust bin.
Cleaning the robot's filter
1.
Remove filter by pulling the white tab.
Cleaning
After each use
Once every week
Once every week
Once every month
Once every month
Once every month
Once every month
Replacing
-
Every 2 months
Every 6-12 months
Every 3-6 months (or when visibly
worn)
When the silicone rubber strip on
the brush guard becomes visibly
worn
-
-
Open dust bin's hatch to empty it.
2.
2.
Clean the filter with the cleaning tool.
13 VG RVC 3000