Cleaning Schedule - Venga VG RVC 3000 WH Manual Del Usuario

CLEANING SCHEDULE

1. Setting the clock on the remote control
Press the button on the
remote control. The hour
section begins to flash in
the clock display setting
window.
2. Setting a cleaning schedule
Press the button on
the remote control, and
then the hour
begins to flash in the clock
display setting window.
3. Canceling a cleaning schedule
Press and hold the
robot will beep twice when the cleaning schedule has been cancelled completely.
Note:
•
Make sure the remote control is located near the robot while setting the clock or
schedule as it has to communicate with the robot.
•
The clock works with the 12-hour time system. Make sure you use the right time period
(AM = morning, 00:00 to 11:59. PM = afternoon, 12:00 to 23:59).
•
The start of the scheduled cleaning cycle can be about 5 minutes off the set time.
VG RVC 3000
Press the
select the desired figures.
Press the
select the minute or hour
section.
Press the
select the desired figures.
Press the
section
select the minute or hour
section.
button for approximately 4 seconds on the remote control, the
or button to
Then press the
The robot will beep when
or button to
the
completed.
or button to
Then press the
Make sure the robot beeps
or button to
to confirm the schedule. It
will start the automatic
cleaning mode every day
at the scheduled time.
12
button.
clock setting
button.
is