System Setup; Dvd Setup Menu - Packard Bell DVX 360 USB Manual De Instrucciones

Menu DVD - Press the Menu DVD button to view the available titles
on the disc. Select with the Up
buttons and press Play to start display.
Sub-menu - With PBC on (see below), press the Sub-menu button to
display the available options (only valid for discs with multi-menu).
When the unit is in PBC OFF or stop state, press this button to
activate the nine pictures browse function. Select the number you
wish to play.
Navigation buttons - These buttons are used to
browse through several menus.
Numeric buttons - To play a track directly, press
the corresponding number. Use the +10 button for
numbers above 9.
PBC button (Program Backward Control) - With PBC on you must
return to the main menu if you wish to select a title, chapter or song.
With PBC off, you can select during display or stop.
A-B - Pressing the A-B button sets the start and end of a section you
wish to repeat. Press it again to stop repeating.
Repeat - Repeats chapters or titles (not available for all functions).
Zoom - Press to zoom 1.5, 2 or 4 times. Press again for normal view.
Volume +/- - Press the VOL+ and VOL- buttons to set the
volume level.
Random - Selects CD and MP3 music tracks in a random
order.
Mute - Press to mute or resume sound.
L/R - Press the L/R button to toggle between the different audio
modes. If the disc supports several audio languages, you can use this
button to select one.
Video Out - Press the Video Out button repeatedly to switch
between CVBS, CVBS+YUV, RGB, CVBS+S-VIDEO output modes.
PSCAN (Progressive Scan) output mode is available only if the unit
supports this.
Display Mode - Switch between the interlaced mode and progressive
scanning mode (if supported).
Pause - To temporarily interrupt and resume playback.
Fast Forward/Rewind - Use these buttons for fast forward or
rewind. Pressing the buttons repeatedly changes the speed.
Stop - Press once to stop playback and keep the position in
memory. If you press play the playback will resume (certain
types of discs only) from the point it was stopped. If you press Stop
again, this will completely stop display.
S
YSTEM SETUP

DVD setup menu

Press the Setup button to enter the setup menus. In the DVD setup
menu a password may be requested. The default password is
Use the Up , Down
buttons to browse the options and press Play
menu or select a function. Press Setup again to exit
Setting up your DVD player
6 -
All manuals and user guides at all-guides.com
and Down
Set video functions: Picture Mode, Angle mark, OSD Language,
Captions and Screen Saver
Angle mark - If supported by the disc, you can set the Angle mark to
ON or OFF.
OSD language - Select one of the available OSD languages.
Captions - Switch captions on or off.
Screen Saver - The unit automatically activates a screensaver after a
few minutes of inactivity. This is to protect your TV screen.
2001 .
, Left and Right
to enter a sub
.
Main page
.
Picture Mode -
Auto
- Selects the optimum picture mode automatically.
Film - Selects the Film picture mode.
Video - Selects the Video picture mode.
Smart
- Same as Film Mode but with additional filtering to reduce
certain side effects on motion.
Super Smart (default) - This is the best mode for de-interlacing
virtually all source material.
Speaker setup
Connecting to an external audio system
Option 1
Stereo amplifier
decoder audio input
audio input
DVD Player audio DVD Player digital
output (2 channel)
Option 2
Dolby digital
audio output