Safety Of Others; Electrical Safety - Black and Decker DV7210EL Manual De Instrucciones

Do not probe the charger.
u
The appliance/tool/battery must be placed in a well venti-
u
lated area when charging.

Safety of others

This appliance is not intended for use by persons (includ-
u
ing children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concern-
ing the use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not
u
play with the appliance.
Residual risks.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any rotating/moving
u
parts.
Injuries caused when changing any parts, blades or
u
accessories.
Injuries caused by prolonged use of a tool. When
u
using any tool for prolonged periods ensure you take
regular breaks.
Impairment of hearing.
u
Health hazards caused by breathing dust developed
u
when using your tool (example:- working with wood,
especially oak, beech and MDF.)

Electrical safety

Your charger has been designed for a specific voltage. Always
check that the mains voltage corresponds to the voltage on
the rating plate. Never attempt to replace the charger unit with
a regular mains plug.
Symbols on the charger
#
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
Short circuit proof safety isolating transformer. The
mains supply is electrically separated from the
transformer output.
All manuals and user guides at all-guides.com
$
Features
This tool includes some or all of the following features.
1. On/off switch
2. Bowl release button
3. Charging indicator
4. Dust bowl
5. Dust collector
6. Charger
7. Charging base
Assembly
Accessories (fig. A, B & C)
These models may be supplied with some of the following
accessories:
u
u
u
Fitting the brush tool (Fig. A). (DV7210EL Only)
u
The integrated brush tool (Fig. B). (DV1010EL and
DV1410EL Only)
u
The integrated crevice tool (Fig. C). (DV1010EL and
DV1410EL Only)
u
u
Use
u
u
(Original instructions)
The charging base is intended for indoor use only.
A brush tool (8) for furniture and stairs.
An Integrated brush tool (9) for furniture and stairs.
An Integrated crevice tool (10) for confined spaces.
Insert the accessory into the front of the appliance. Make
sure that the accessory is pushed fully in.
Flip down the brush tool (9) at the end of the dust collec-
tor.
Extend the crevice tool (10) by pulling the crevice tool (10)
until it locks into position.
Retract the crevice tool (10) by pressing the area (11) and
pushing the crevice tool (10) back into the dust collector
(5).
Before first use, the battery must be charged.
Place the appliance on the charging base whenever it is
not in use.
ENGLISH
5