Vivanco UR 5000 Instrucciones Para El Uso página 4

All manuals and user guides at all-guides.com
UR 5000 UNIVERSAL CONTROLLER
8. Briefly press the ON/OFF
(appliance on/off) button once. The lamp
(LED) blinks. –When searching for a device
code of a device, which has no infrared
controllable ON/OFF function, then press
instead of ON/OFF alone alternately ON/OFF
and another important button, e.g. press >
(Play) button and use the Play function to
search. Make sure that a tape, a DVD or a
CD is inserted in the tape deck, player or
recorder.
9. Press the
(appliance on/off) or ON/OFF & e.g. Play
button alternately repeatedly, approx. every
1,5 seconds, until the appliance, e.g. your
DVD player, reacts. - If you notice the
reaction of your appliance too late and the
next code has already been emitted you can
go back by pressing P- and then ON/OFF or
ON/OFF & Play again. If your appliance has
switched itself off you must switch it back on
again, e.g. on the appliance or with the
original remote control, to continue searching.
10. When your
correctly, press the appliance button, e.g. TV,
and end the search. The lamp (LED) goes
out.
- The UR 5000 continues with the search at
the point where you interrupted it. When the
end of the code list is reached the search
stops automatically. The remote control blinks
quickly several times. The code last entered
remains stored. The search stops after
approx. 15 seconds of inactivity.
– DVD, CBL and other device codes can be
searched and locked into any device mode
except TV & VCR. Just set right search code.
Vivanco GmbH, D-22926 Ahrensburg, E-Mail:
[email protected], Helpline: +49 (0) 4102 231135 4
ON/OFF
appliance reacts