Kärcher BD 50/50 C Bp Classic Instrucciones De Servicio página 33

1 Seal
Installation information
Ensure the correct seating of the seal during installation.
The seal must be sufficiently long. The installation of a seal
that is too short is not permitted. The seal must be properly
cut to size.
Seal on the fresh water tank
1 Beginning and end of the seal
2 Washer
Installation information
Pay attention to sufficient length of the seal.
The seal must be placed in the groove of the fresh water
tank.
Seals of the suction turbine
1 Sealings
Installation information
Ensure the correct seating of the seals during installation.
Diagram
Bp variant:
1 Cable inlet
Installation information
Mind correct installation of the lines.
33
English 9.808-230.0 Rev. 01 (03/20)