KENMORE ELITE 796.8099 Serie Guia De Uso Y Cuidado E Instrucciones De Instalacion página 33

BEFORE CALLING FOR SERVICE (cont.)
Problem Possible Causes
Steam doesn't
• Water level error.
generate but no error
code is shown.
Garments still wrinkled
• Too many or too different types
after
STEAM FRESH .
™
There are no creases
• The function of this cycle is to
left on garment after
STEAM FRESH .
™
Garments have static
• This is normal.
after REDUCE STATIC.
Garments are too
• Correct drying options not
damp or too dry after
REDUCE STATIC.
Garments are not
• This is normal.
uniformly damp after
EASY IRON.
Water drips from door • This is normal.
during Steam Cycle.
Steam is not visible
• This is normal.
during Steam Cycle.
Drum does not turn
• This is normal.
during Steam Cycle.
Cannot see steam
• This is normal.
vapor at the beginning
of cycle.
The display shows
• MORE TIME button pressed.
BULKY LOAD.
Odors remain in
• STEAM FRESH
clothing after
STEAM FRESH .
™
2 bars are displayed
• Ductwork is slightly too
In the LCD screen.
• Partial blockage of the ductwork
END OF CYCLE
4 bars are displayed • Ductwork is too long or has too
In the LCD screen.
• Significant blockage of the
NEED FLOW CHECK
THE DUCTWORK HAS
A BLOCKAGE THAT NEEDS
TO BE REMOVED
IMMEDIATELY.
All manuals and user guides at all-guides.com
TROUBLESHOOTING
of garments in dryer.
remove wrinkles from fabric.
selected.
did not
™
remove odor completely.
long or has too many
turns/restrictions.
due to lint buildup.
many turns/restrictions.
ductwork due to lint buildup or
debris.
Solutions
• Unplug dryer and call for service.
• Small loads of 1 to 5 items work best.
• Load fewer garments. Load similar-type garments.
• Use an iron to make creases.
• Depends on individual moisture level in skin.
• Select load weight manually before starting REDUCE
STATIC option.
• Depends on the amount or type of garments.
• This is steam condensation on door surface.
• Steam vapor is difficult to see when the door is closed.
• The drum is turned off so that the steam vapor remains
in the drum.
• Steam is released at different stages of the cycle for
each option.
• Pressing the MORE TIME button several times will set
the cycle for a large load such as a comforter.
• Fabrics containing strong odors should be washed in a
normal cycle.
• sInstall a shorter or straighter duct run. See the
Installation Instructions.
• Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times may
be longer.
• If "END OF CYCLE" is displayed after the end of cycle, it
will be off in 4 minutes. If POWER button is pressed or the
door is opened, power will be off immediately.
• Install a shorter or straighter duct run. See the Installation
Instructions.
• Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times may
be longer.
• If "NEED FLOW CHECK" is displayed after the end of
cycle, it will be off in 2 hours. If POWER button is pressed
or the door is opened, power will be off immediately.
33