Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
Note:
1.
The sensitivity of the automatic locking video trigger is determined by
the sensitivity of the collision. The higher the sensitivity setting, the
greater the probability of being triggered.
2.
The total capacity of the event video file accounts for 30% of the total
capacity of the current memory card. When the event video file
reaches the upper limit, new event video file will automatically
overwrite old event video file. It is recommended to periodically check
and save your event video files to avoid loss.
Lock recording will not trigger in either of the following situations: Loop
3.
recording is off or time-lapse recording is on.
4.2.3 Parking Mode(When the parking mode is turned on, the time-lapse
video function will not work. These two functions cannot run at the same
time)
Parking Mode operates as a sentry function under different situations. You
can switch to different parking monitoring modes according to different
parking situations.
After parking mode is turned on, there are two ways to record. You can
wait for 5 minutes to rstart automatically, or long press the
begin manually.
2560x1440P 30FPS
120
00:00:37
05-01-2022 14:09:07
MP/H
- 21 -
button to
Tabla de contenido
