Assembly; Assembly Of Pump Kit - Medela Harmony Instrucciones De Uso

2. Assembly

Parts you will need for this step:
• Handle, Diaphragm, • Pump Body
Stem, O-Ring
Assembly
• White membrane • Yellow valve
• Breastmilk bottle • Breastshield
and lid
Note
• Inspect valves for cracks or chips and
inspect membranes for holes, tears or
warping. If you notice any damage to
these parts, replace them immediately.
• Check stem to make sure o-ring is
present.
Info
• Carry out all the steps with care and
assemble the pump kit correctly for
optimum performance.
10
All manuals and user guides at all-guides.com

2.1 Assembly of pump kit

1
Wash hands before touching
breastpump, kit and breasts
and avoid touching the inside of
containers or lids.
4
Screw bottle onto pump body.
2
Snap membrane onto valve
until membrane lies completely
fl at on valve.
5
If the handle components
have been disassembled, place
the oval shaped base of the stem
into the diaphragm.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
3
Push yellow valve securely onto
inner ring of pump body.
6
Continued
next page.
Correct Incorrect
Hint: Make sure the oval shape
is lined up correctly in the
diaphragm.
11