Expand The Number Of Lines - Solidyne HL 202 Manual De Usuario

TELEPHONE HYBRIDS HL202 & 203VQ
2.5

Expand the number of lines

The connector HYBRID LINK allows to link up to three HL202/203 units to expand the number of
lines. The options are:
HL203VQ + HL202
HL203VQ + 2 HL202
Figure 4 (next page) shows the connection cable for two and three units, using male DB-9 at both
ends.
Figure 5 (page19) shows the connection of 2 HL-202 units. Audio connections can be made over
any unit. Both units presents simultaneously the audio signal at XLR connector; and both receives
audio frem console, no matter to witch unit the signal enters (Send to phone line). Therefore we
recommend to connect the audio to the same unit. When connects a HL203 and HL202, audio
connections are made over HL203.
You can make conferences between any lines, or between all lines (land lines and cell phones).

CUE outputs are independent in each hybrid. Each CUE output gives audio of the lines plugged to this unit.
All units can be connected to the AC outlet.

The cable for link two hybrids is included from factory.
2 x HL202 4 lines
3 x HL202 6 lines
5 lines (one Bluetooth) with VQR audio processing.
7 lines (one Bluetooth) with VQR audio processing.
Figure 4 (cable link)
Page 28
ENGLISH