Using The Core Temperature Thermometer; Using The Timer; Switching On The Oven Light; Switching Off The Functions And Appliance - WMF PROFI PLUS URBAN MASTER GRILL Manual De Instrucciones

7.3| USING THE CORE TEMPERATURE
THERMOMETER
Connect the core temperature thermometer
•
(15) to the connection (16) on the right side
of the control panel (5).
The thermometer can only be adjusted when
the appliance is already switched on.
If no core temperature thermometer is con-
nected or if it is not connected correctly, "nt"
will appear after a short time.
The target temperature can be set using the
•
rotary knob.
Target temperature: 30°C to 100°C
An acoustic signal will sound (3x every 10 sec-
onds) after the target temperature has been
reached. This does not interrupt the grill
function.

7.4| USING THE TIMER

The timer allows you to set a countdown of up
to 9 hours 59 minutes for the grill, the oven
or without assigning the function as a solo
countdown.
The grill and/or oven and/or timer icon light up
depending on which is active.
Select the timer for the grill, the oven or
•
without assigning the function as a count-
down by touching the relevant icon twice.
The selected icon remains lit.
The time can be set using the rotary knob.
•
If the timer of the grill or the oven is indicated,
the remaining time of the respective function
can be displayed by touching the symbol once.
A short signal tone will sound 1 minute before
the timer runs out, and the display will auto-
matically change to show the time remaining
on the timer.
Now you have the option of setting the timer
again or extending the time.
If necessary, set the timer again using the
•
rotary knob.
When the timer expires, the status indicator
above the timer icon lights up white.
A signal tone also sounds at regular intervals.
The selected function switches off after the
time has expired.
34

7.5| SWITCHING ON THE OVEN LIGHT

Touch the light icon.
•
The oven light will illuminate for 30 seconds and then
turn off automatically.
Alternatively, switch off the light by repeatedly touch-
•
ing the light icon.

7.6| SWITCHING OFF THE FUNCTIONS AND APPLIANCE

Hold down the icon for the function you want to switch
•
off.
When all functions are switched off, the display shows
"-:--".
After 5 minutes, the appliance automatically switches to
standby mode and the display "-:--" becomes darker.
To turn the appliance off completely, press the mains
•
switch (21) and unplug the mains plug from the wall
outlet.
7.7| CHANGING THE TEMPERATURE UNIT FROM °C TO °F IN STANDBY MODE
The setting can only be made in standby mode
Touch the thermometer icon for 3 seconds.
•
The temperature unit "°C" fl ashes.
Set to "°F" using the rotary knob.
•
After 4 seconds of inactivity, the new temperature unit is
set.
35